Sanding Sealer (Amber Toned)

• Get that “wet” look – Enhances and prepares wood for top coats, bringing out the natural color in the wood grain.
• Becomes one with the wood– Its thin viscosity makes Sanding Sealer easy to spread and allows it to penetrate into porous wood species.

1. Environment: Apply in an environment between 68-75ºF.
2. Preparation: Sand bare wood with 220 grit sandpaper.
3. Application: Apply one coat of Sanding Sealer and allow to dry. Lightly scuff-sand to remove any raised grain fibers. Apply an additional 1-2 coats to seal wood and provide an excellent surface, ready to topcoat.
4. Recoat Time: Allow 1-2 hours of drying time between coats.

(Optional) Working with Stain: Prepare wood and apply 1 coat of Sanding Sealer, then allow to dry. Sand back down to bare wood, leaving Sanding Sealer only in the wood grain and pores. Apply stain and allow it to thoroughly dry. (Note: oil based stains can take up to a week to dry). Apply another 1-2 coats of Sanding Sealer over the dried stain. This will help seal the stain color and keep it from spreading. Now you’re ready for a clear top coat.

• Store at room temperature in a dry place, out of direct sunlight.
• Do not subject the product to freezing or hot temperatures.
• CrystaLac products have a shelf life of 5 years after opening.
• Use in an environment above 68ºF.

• Keep out of reach of children.
• Do not allow children to use the product unsupervised.
• Do not ingest or breathe vapors.
• Avoid contact with eyes and skin.
• When spraying or sanding, wear proper eye and respiratory protection and ventilate the area. Use an OSHA approved mask.